Categories
Gator Efflorescence Cleaner (1 Gallon)
Product Details
Items per pallet: 192
Items with no charge: 47
Price is per 1 Gallon jug.
Payment options: Credit card, debit card, Paypal, or Apple Pay (iPhone or iPad only)
[tab name='Description']
GATOR EFFLORESCENCE CLEANER will remove any efflorescence stains trapped in the concrete pavers and natural stone pores. It will make the pavers look more clean and vibrant. This efflorescence cleaning is a necessary step before a sealer is applied. The sealer will be able to get a deeper penetration into the now clean pores.
- Removes efflorescence from the surface of concrete pavers, wet cast and natural stones
- Cleans pavers prior to sealing
- Removes penetrated dirt
- Restores pavers to their natural color
- No hydrochloric acid in product
- Washes off with water
- 1 Gallon provides coverage for approximately 200 square feet
[tab name='Application Instructions']
PLEASE NOTE
- GATOR EFFLORESCENCE CLEANER should be used prior to applying a sealer to ensure a proper sealer adhesion.
- Freshly installed Gator Polymeric Sand must be allowed to cure for 48 hours at above 59°F (15°C) and no rain before using GATOR EFFLORESCENCE CLEANER.
- Do not let product dry up on paver surface.
- Wear goggles and rubber gloves.
- Never use on NEW concrete pavers. Wait at least 60 days after new pavers are installed before using this product.
- ALWAYS TEST the product on a small hidden area of approximately 4 sq. ft. (0.4 sq. m.) to ensure the results will meet your expectations. Do not apply under extremely strong sun.
- IDEAL MIXTURE: Dilute to 4 parts water, 1 part GATOR EFFLORESCENCE CLEANER concentrated liquid, any concentration greater than this can discolor the pavers or use the Gator Sprayer attached to a one gallon, to ensure proper dilution of the GATOR EFFLORESCENCE CLEANER.
STEP 1
Wet paver surface with water.
STEP 2
Use a pump sprayer or watering can to apply the diluted product on the wet paver surface. Wait one minute for product to react then scrub the surface vigorously using a hard bristle brush. 1 U.S. gal. (3.78 L.) of diluted product is to be used for every 40 sq. ft. (3.7 sq. m.) of paver surface.
STEP 3
Rinse thoroughly with water and move on to the next section of 40 sq. ft. (3.7 sq. m.).
STEP 4
Repeat steps 2 and 3 over all the sections in question.
STEP 5
Once the surface is clean, use water hose and generously rinse off GATOR EFFLORESCENCE CLEANER until there is no more foaming action on the pavers.
IMPORTANT
You might have to redo it again if there is a lot of efflorescence trapped in the pavers.
[tab name='Resources']
[endtab]
Display prices in:USD
